May 26,2023
May 26,2023
As an e-bike owner, you know your bike chain is essential to your e-bike body. It is responsible for offering power from the pedals to the e-bike drive-train. And it's also the way how your e-bikes work, from the pedals to the tires. But there is also a problem that riders always meet; what if the bicycle chain slips? This issue has been a frustrating, long-term problem to deal with.
Even though this issue is frustrating, you have to solve it to avoid the chance or probability of slipping the chain can put you in danger. We will provide information and solutions to all our e-bike users; I hope this article can advise you.
Contents
1. The reason that your Bike Chain is Slipping
1.1 Worn-out
1.2 Dirty
1.3 Check your chain to see if it's loose or not
1.4 Check your chain if its too tight
1.5 Bent derailleur
The reason that your Bike Chain is Slipping
Worn-out
The most common reason your bike chain is slipping is because of the worn-out of your chain. This is unavoidable wear and tear while using any product. There is a tool called chain checker; use it to see if it is the reason. If so, you will better replace the chain with a new one. The step is easy, remove the old one first, then measure the distance as the old one, or you can recount it from the center of one pin to the other. And install the new one in the right place.
Dirty
The bicycle drive train, of which the chain is a part, can lose a lot of performance if it is not in perfect condition, and this requires a correct level of lubrication. The drive train is also an element that gets the dirtiest, as dust, mud, and moisture can constantly accumulate on the chain, chainrings, and sprockets if action is not taken in time.
The maintenance of the chain consists of a thorough and regular cleaning and adjustment of this element. It is advisable to use appropriate products tested for effectiveness to do this. Following good chain cleaning and lubrication guidelines will end annoying noises and misalignment in the drive train and extend its service life.
The bicycle drive train, of which the chain is a part, can lose a lot of performance if it is not in perfect condition, and this requires a correct level of lubrication. The drive train is also an element that gets the dirtiest, as dust, mud, and moisture can constantly accumulate on the chain, chainrings, and sprockets if action is not taken in time.
The maintenance of the chain consists of a thorough and regular cleaning and adjustment of this element. It is advisable to use appropriate products tested for effectiveness to do this. Following good chain cleaning and lubrication guidelines will end annoying noises and misalignment in the drive train and extend its service life.
Check your chain to see if it's loose or not
If your chain is slipping, check it to see if it is too loose to slip off, e-bike chain asks for enough tension to keep it firmly. To fix this problem, lift the chain through the midpoint; if you feel slack, you can use the derailleur to adjust the chain. And you occasionally spin the wheel to see if the chain is fixed in the correct position.
Check your chain if it's too tight
By the same token, if your chain is slipping, check your to see if it is because the screw is too tight. And the fix method is almost the same as the loose one.
Bent derailleur
If you still cannot find the problem of how your chain slipped off, you can check your derailleur. It can be caused by a dropped or bump. To fix this problem, use a wrench or pliers to bend it back to the right place, and be sure to use a derailleur guard.
Tips for maintenance of E-bike chain
Remember to put oil on your bike chain. Two types of liquid lubricants are on the market: oils and wax. In addition, there are two types of oils: for dry environments and wet environments.
They must be specific products for electric bicycles, which are tested so as not to damage the components of the drive-train. If you opt for a liquid lubricant penetrating well into the links, do not forget to remove excess application with a cloth to avoid accumulating excess dust and dirt.
If you use wax, remember that the maximum level of lubrication is reached when a dry film forms on the chain. This invites you to lubricate the day before a ride. If this is not possible, lubricate at least 30 minutes before riding. Finally, it is best not to use sprays, as their application can contaminate discs and pads if they are used near the cassette.
There is no doubt that it can be a frustrating experience when you meet some problem happened on your e-bike. Follow our tips to solve or avoid such a situation. Also, if you need clarification on the repair methods, it is always a good idea to seek professional help from the e-bike shop where you purchase, such as; you can ask Magicycle 24-HOURS customs service anytime you meet an unclear problem.
To maintain your chain of an e-bike, you can make sure you can have a safe and confident riding experience. But before any maintenance, you will need a good-quality e-bike to start your journey. Magicycle provides all kinds of electric bicycles for adults to fit your need.
Let's celebrate national bike month. Come and grab a free front basket with the purchase of Deer, Jaguarundi, or the Pro series. Limited offer, you know what to do!
